Your watering globe arrives ready to use. Unpack it carefully, rinse it out, and follow the steps below for even, hands-off watering.
Getting Started
- Unbox carefully. The globe is glass, so remove packing material slowly and check the stem for chips before use.
- Rinse first. Flush the bulb and stem with clean water to clear any dust from shipping.
- Water the pot first. Moisten the soil normally before inserting the globe so it doesn't drain all at once into bone-dry soil.
Filling and Inserting
- Fill through the stem. Hold the globe under a gentle stream of water or use a narrow-spout watering can until the bulb is nearly full.
- Cover the opening. Place a fingertip over the stem tip as you turn it upright to limit spillage.
- Insert at an angle. Push the stem 2 to 3 inches into moist soil, angled slightly away from the main stem of the plant so you don't damage roots.
- Steady it. Firm the soil around the stem so the globe sits securely and won't tip in a lightweight pot.
Everyday Use
- Expect a slow release. Water leaves the globe only as the surrounding soil dries, so an emptying globe means the plant was thirsty.
- Plan on up to 2 weeks. Actual duration depends on pot size, soil mix, light, and household humidity. Check the level the first week to learn your plant's pace.
- Refill as needed. Remove, rinse, refill, and reinsert in the same hole to avoid disturbing roots.
- Best for indoor pots. Use in containers with drainage; avoid very sandy or very heavy soils, which can drain the globe too fast or too slow.
Care and Cleaning
- Clean the stem. If flow slows, soil has likely packed into the tip. Flush with water or clear gently with a thin wire.
- Fight mineral buildup. Soak occasionally in a mix of white vinegar and water, then rinse well.
- Store safely. Empty and dry the globe before storing, and keep it padded to protect the glass.